U8D1-64 – Application of t Tests
For this discussion:
• Identify a research question from your professional life or career specialization that can be addressed by an independent samples t test.
• Indicate why a t test would be the appropriate analysis for this research question.
• Describe the variables and their scale of measurement.
• Discuss the expected outcome (for example, “The Group 1 mean score will be significantly greater than the Group 2 mean score because.”)
In Unit 8, we will apply our understanding of t tests in an IBM SPSS assignment. As in Unit 6, you will use the Data Analysis and Application (DAA) Template to submit your assignment.
Testing Assumptions: The Shapiro-Wilk Test and the Levene Test
Recall from Unit 7 that two assumptions of the t test are that:
1. The outcome variable Y is normally distributed.
2. The variance of Y scores is approximately equal across groups (homogeneity of variance assumption).
The Shapiro-Wilk Test
In addition to a visual inspection of histograms and calculation of skewness and kurtosis values, SPSS provides a formal statistical test of normality referred to as the Shapiro-Wilk test. A perfect normal distribution will have a
Shapiro-Wilk value of 1.00. Values less than 1.00 indicate an increasing departure from a perfect normal shape.
The null hypothesis of the Shapiro-Wilk test is that the distribution is normal. When the Shapiro-Wilk test indicates a p value less than .05, the normality assumption may be violated, which can be problematic.
To obtain the Shapiro-Wilk test in SPSS, follow the step-by-step guide for t tests that is provided in the Unit 8 assignment. SPSS provides the Shapiro-Wilk test output for interpretation. A significant Shapiro-Wilk test ( p < .05) suggests that the distribution is not normal and interpretations may be affected. However, the t test is fairly robust to violations of this assumption when sample sizes are sufficiently large (that is, greater than 100 members).
The Levene Test
The homogeneity of variance assumption is tested with the Levene test. The Levene test is automatically generated in SPSS when an independent samples t test is conducted. The null hypothesis for the Levene test is that group variances are equal. A significant Levene test ( p < .05) indicates that the homogeneity of variance assumption is violated. In this case, report the “Equal variances not assumed” row of the t-test output from SPSS. This version of the t test uses a more conservative adjusted degrees of freedom ( df) that compensates for the homogeneity violation. The adjusted df can often result in a decimal number (such as df = 13.4), which is commonly rounded to a whole number in reporting ( df = 13). If the Levene test is not significant (that is, homogeneity is assumed), report the “Equal variances assumed” row of the t-test output from SPSS.
Proper Reporting of the Independent Samples t Test
Reporting a t test in proper APA style requires an understanding of several elements, including the statistical notation for an independent samples t test ( t), the degrees of freedom in parentheses, the t value, the probability value, and the effect size. To provide context, provide the means and standard deviations for each group. Warner (2013) also recommends reporting the 95% confidence interval (CI) for the difference in sample means. Consider the following example from Warner (2013, p. 213):
The mean HRs differed significantly, t(18) = −2.75, p = .013 (two-tailed). Mean HR for the nocaffeine group ( M = 57.8, SD = 7.2) was about 10 bpm lower than mean HR for the caffeine group ( M = 67.9, SD = 9.1). The effect size, as indexed by η 2, was .30; this is a very large effect. The 95% Unit 8 – t Tests: Application
CI for the difference between sample means, M 1 − M 2, had a lower bound of −17.81 and an upper bound of −2.39. t , Degrees of Freedom, and t Value
The statistical notation for an independent samples t test is t, and following it is the degrees of freedom for this statistical test. The degrees of freedom for t is n1 + n2 − 2, where n1 equals the number of participants in Group 1 and n2 equals the number of participants in Group 2. In the example above, there are 10 people in each group: N = 20 ( n1 = 10; n2 = 10), so the df = 18 ( n1 + n2 − 2). Warner (2013) recommends that the t test should not be conducted with groups of fewer than 10 members. The t value is a ratio of the difference in group means divided by the standard error of the difference in sample means. The t value can be either
positive or negative.
Appendix B (pp. 1056–1057) of the Warner text provides critical values of t for rejecting the null hypothesis. In the example above, with 18 degrees of freedom and alpha level set to .05 (two-tailed), the table indicates a critical value of ±2.101 to reject the null hypothesis. The obtained t value above is −2.75, which exceeds the critical value required to reject the null hypothesis. SPSS determined the exact p value to be .013. This p value is less than .05, which indicates that the null hypothesis should be rejected for the alternative hypothesis—that is, the two groups are significantly different in mean heart rate.
A common index of effect size for the independent samples t test is eta squared (η2). SPSS does not provide this output for the independent samples t test, but it is easily calculated by hand with the following formula: t2 ÷ ( t2 + df). In the example above, the calculation is (−2.75)2 ÷ [(−2.75)2 + 18] = 7.56 ÷ [(7.56 + 18)] = 7.56 ÷ 25.56 = .30. The effect size is interpreted using Table 5.2 in the Warner text (p. 208).
Recall that confidence intervals (CIs) were introduced in Unit 2. Standard APA reporting of the independent samples t test should include the 95% confidence interval for the difference in sample means, which is provided in the SPSS output for the t test.
The Warner text provides a “Results” example at the end of each chapter for all statistics studied in this course. You are encouraged to review these examples and follow their structure when writing up Section 4, “Interpretation,” of the DAA Template.
Warner, R. M. (2013). Applied statistics: From bivariate through multivariate techniques (2nd ed.). Thousand Oaks, CA: Sage.
To successfully complete this learning unit, you will be expected to:
1. Interpret SPSS t-test output and draw conclusions.
2. Articulate a research question, null hypothesis, and alternative hypothesis.
3. Analyze the application of t tests in your career.
[u08s1] Unit 8 Study 1 – Readings
Use your IBM SPSS Statistics Step by Step text to complete the following:
• Read Chapter 11, “The t Test Procedure.” This reading addresses the following topics:
◦ Independent samples t test.
◦ Paired samples t test.
◦ One-sample t test.
◦ Significance testing.
◦ SPSS commands.
◦ Reporting and interpreting SPSS output.
Try it now!
How it works?
Follow these simple steps to get your paper done
Place your order
Fill in the order form and provide all details of your assignment.
Proceed with the payment
Choose the payment system that suits you most.
Receive the final file
Once your paper is ready, we will email it to you.
Australia Assessments has gained an international reputation of being the leading website in custom assignment writing services. Once you give us the instructions of your paper through the order form, we will complete the rest.
As we work towards providing the best custom assignment services, our company provides assignment services for any type of academic essay. We will help you develop professionally written essays that are rich in content and free from plagiarism.
Admission and Business Papers
Our skilled team of professional writers will ensure that we help you craft a remarkable admission essay for your desired Master's program in your institution of choice. We won't stop there. Once you enter the job market, we will be available to secure you a position at your desired worksite by creating an outstanding portfolio or resume.
Editing and Proofreading
Our editorial team is always available for all editing and proofreading services. They check completed papers by our writers and also provide professional opinions to papers completed by our clients.
We harbor professional academic writers with different qualifications in diverse academic fields. As such, we are capable of handling both simple and technical papers. Ensure that you provide us with correct and complete instructions in the order form.