Data analysis and visualization | Computer Science homework help

 

Suppose your goal is to build a model to predict which of your customers don’t have health insurance; perhaps you want to market inexpensive health insurance packages to them. You’ve collected a dataset of customers whose health insurance status you know. You’ve also identified some customer properties that you believe help predict the probability of insurance coverage: age, employment status, income, information about residence and vehicles, and so on.

In this assignment we’ll address issues that you can discover during the data exploration/visualization phase. First you’ll treat missing values. Then you will apply some common data transformations and when they’re appropriate: converting continuous variables to discrete; normalization and rescaling; and logarithmic transformations.

Customer data can be downloaded from : custdata.RDS

1. Load data into a data frame named custData using readRDS() function.

If you saved file custdata.RDS in the folder C:/tmp, just load data as

custData<-readRDS(“C:/tmp/custdata.RDS”)

2. Print number of rows and columns in the file. Use dim() function.

3. Print column names.

4. Print number of NAs in each column.

Hint: One way to find NAs is to use sum() and is.na() functions, by passing the column to is.na().

5.  Adding New Columns to a Data Frame

The variable gas_usage mixes numeric and symbolic data: values greater than 3 are
monthly gas bills, but values from 1 to 3 are special codes. In addition, gas_usage has
some missing values.

The value 1 means “Gas bill included in rent or condo fee”.
The value 2 means “Gas bill included in electricity payment”.
The value 3 means “No charge or gas not used”.

One way to treat gas_usage is to convert all the special codes (1,2,3) to NA, and to add three new indicator variables, one for each code. For example, the indicator variable gas_with_electricity will have the value 1 whenever the original gas_usage
variable had the value 2, and the value 0 otherwise.

A) Create the three new indicator variables, gas_with_rent, gas_with_electricity, and no_gas_bill. Add these indicators to the data frame custData.

Hint: Use ifelse() function. Check texbook pages 66-67 for samples.

B) Print the column names of custData to check if these new columns are added.

6. Convert Invalid Values to NA

The variable age has the problematic value 0, which probably means that the age is unknown. In addition, there are a few customers with age greater than 100, which may also be an error. However, for this project you decide to only treat the value 0 as invalid, and to assume ages greater than one hundred years are valid.

The variable income has negative values. We’ll assume for this project those values are invalid.

A) Convert invalid age and income variables to NA, as if they were “missing variables.”

B) Convert all values of gas_usage that are less than 4 to NA. (The reason we want to do this is because we already created three new indicators for the codes 1,2 and, 3 in gas_usage column. And therefore we want to label these entries as missing variables because they don’t represent the gas bill amount.)

Hint: Use ifelse() function. Check texbook pages 66-67 for samples.

7. Barcharts, Histograms, Scatter Plots

A) Plot barcharts of the predictors num_vehicles, recent_move, health_ins, marital_status, is_employed, and housing_type.

The following is the bar chart of the housing_type:

housig_type_barchart

B) Print histogram of age and income. Comment on the distribution and skewness of the data for these predictors.

C) Print the scatter plot of age versus income:

scatterplot_age_income

8. Density Plot and Transformation to Eliminate Skew

A) Print the density plots of income and age.

B) Is data right or left skewed?

C) If data is skewed, apply a transformation to remove the skewness as much as possible.

Hint: Check textbook page 74-75.

The following is the density plot of the income :

density_income

And the following is the density plot after log10() is used to transform income:

log10_income

9. Convert Continuous Variable to Discrete

We would like to create the following ranges for the age predictor.

[0,25], (25,65], (65,130]

A) Use cut() function to cut the age predictor data into ranges given above.  Add the result as a column to the data frame custData as a new predictor named ageRange.

Hint: Listing 4.6 in the textbook, page 71.

B) Plot the bar chart of the ageRange, as shown below:

age_range

10. Imputed Value for the age Predictor

You might believe that the data is missing because the data collection failed at random, independent of the situation and of the other values. In this case, you can replace the missing values with “a reasonable estimate,” or imputed value. Statistically, one commonly used estimate is the expected, or mean.

For age predictor replace all NAs by the mean of the age values that are not NAs.

Caution: The R mean() function returns a number not an integer. Make sure that you convert it to integer using  as.integer() function.

A) Print the mean value you found.

B) After replacing the NAs with mean values, repeat the same process in part 10 above to print the bar chart:

age_range_barchart2

 

In part 5) of week 4 assignment one of the question is about adding indicator variables (new columns) to the data frame. The following statement describes the indicator variable gas_with_electricity:

For example, the indicator variable gas_with_electricity will have the value 1 whenever the original gas_usage variable had the value 2, and the value 0 otherwise.

Assume that the name of data frame is custData. To add the indicator variable gas_with_electricity to the data frame custData, simply use the ifelse() as shown below:

custData$gas_with_electricity<-ifelse(custData$gas_usage==2,1,0)

The statement above adds a new column named gas_with_electricity with values 1 or 0 based on the values of gas_usage column from custData data frame. So, if the value of gas_usage is 2 it assigns 1 as the value of  gas_with_electricity otherwise it assigns 0 as the value of gas_with_electricity.

The other two columns will be added similarly.

Get 20% Discount on This Paper
Pages (550 words)
Approximate price: -

Try it now!

Get 20% Discount on This Paper

We'll send you the first draft for approval by at
Total price:
$0.00

How it works?

Follow these simple steps to get your paper done

Place your order

Fill in the order form and provide all details of your assignment.

Proceed with the payment

Choose the payment system that suits you most.

Receive the final file

Once your paper is ready, we will email it to you.

Our Services

Australia Assessments has gained an international reputation of being the leading website in custom assignment writing services. Once you give us the instructions of your paper through the order form, we will complete the rest.

Essays

Essay Writing Services

As we work towards providing the best custom assignment services, our company provides assignment services for any type of academic essay. We will help you develop professionally written essays that are rich in content and free from plagiarism.

Admissions

Admission and Business Papers

Our skilled team of professional writers will ensure that we help you craft a remarkable admission essay for your desired Master's program in your institution of choice. We won't stop there. Once you enter the job market, we will be available to secure you a position at your desired worksite by creating an outstanding portfolio or resume.

Editing

Editing and Proofreading

Our editorial team is always available for all editing and proofreading services. They check completed papers by our writers and also provide professional opinions to papers completed by our clients.

Coursework

Technical papers

We harbor professional academic writers with different qualifications in diverse academic fields. As such, we are capable of handling both simple and technical papers. Ensure that you provide us with correct and complete instructions in the order form.